Best 6.6kW solar system with battery in Sydney & Australia

When it comes to constantly powering your business premises, the traditional grid system might not be the most cost-effective option. Furthermore, given the increasing global concern for the environment, it would be prudent for your business to make a move in the right direction and switch to a commercial solar power system. This will not only be a responsible decision but will also help to cut down on costs in the long run. A Best 30 kW solar system is a relatively (Compared to residential energy requirement) large installation and would typically be used by small & medium size commercial or industrial entities with high energy consumption needs in Sydney and Australia.

As it is an expensive affair, it’s important to examine several crucial figures when considering a 30kW solar power system, such as the CEC-accredited installer and the reputable brands to consider for optimal performance. No details should be left out during this assessment.

How much should a 30 kW solar system cost?

It is challenging to estimate the cost per watt of installing solar panels because it depends on various factors like

  • brand and types of solar panels
  • inverter type, roof design
  • power configuration of the house (single-phase or three-phase)
  • location (Rebates Zone)
  • and the installer you select

As a guesstimate, a 30kW solar panel installation typically costs between $17000 and $31000

How much will a 30 kW solar save me?

The following points below can be connected to savings and ROI (Return on Investment).

  • How well are we going to utilize it?
  • At which rate Feed-in Tariff has been agreed upon between you and your energy retailer?
  • The climate in the area where you reside.
  • Module efficiency of the panels

Call one of our solar specialists and have your energy bill in hand to find out precisely how much you can save. We can help you with savings, return on investment, and system value. 

The standard output of a 30 kW Solar in major cities

Adelaide                      114kWh

Brisbane                      130kWh

Melbourne                  110kWh

Perth                           122kWh

Sydney                        114kWh

Hobart                        105kWh

How much power does a 30 kW solar system produce?

A 30kW solar system with a 25kW inverter may generate between 100kWh and 140kWh depending on the place where you live, the position of the strings of panels, the slope of the roof, and finally the number of sunlight hours at your spot.

The system must be exposed to direct sunlight for a minimum of 5.5 to 6 hours daily to generate this much electricity. 

Why does a 25 kW Inverter go with a 30kW Solar?

It is advisable to install a 25kW inverter due to its ability to manage up to 133% of its capacity. That is why 30kW panels go with a 10kW inverter.

Additionally, energy would be wasted from the solar panels to the inverter because of the installation’s location, orientation, and roof pitch. For sufficient energy for the solar inverter, it is strongly encouraged to add more panels.

What is the payback period for a 30 kW solar system?

The payback period of a solar system is the time it takes to recover your investment after installation. It is crucial to consider the payback period when selecting a solar system because low payback periods are typically a sign of high-efficiency systems.

A 30kW solar system has a payback period that ranges between three to four years.

Numerous factors including location, roof pitch, panel alignment, power consumption, solar panels efficiency and, most importantly, consumer spending habits determine the payback period.

This also depends on how many daylight hours there are. Following the weather, if your roof does not receive sufficient sunlight to generate enough electricity, you’ll have to install additional solar panels.

Is a 30 kW solar system the right choice or size for you?

Determining which size of solar is best for you depends on your current consumption and near-term planning as more individuals are installing EVs, (Electric vehicles).

Depending on the position and orientation of the roof, a 30kW Solar might generate between 100kWh and 140kWh. Therefore, a 30kW solar will be a suitable choice for you if your average daily consumption is between 70kWh to 100kWh.

Hit on the request to quote to learn more in-depth.

What is the Cost of a 30 kW Solar with Fronius Inverter & SolarEdge Inverter?

Solar energy is a fantastic and cost-effective way to generate electricity. Before Investing in a 30kW solar system with the most well-known and extremely effective inverters, such as a Fronius inverter or a SolarEdge inverter, you should understand how much a 30kW solar system will cost.

Your costs for a 30kW solar system with a Fronius or SolarEdge inverter will range from $25000 to $32000..

Below, you can find our packages featuring the Fronius Eco 27kW Inverter.

What is the Cost of 30 kW Solar with Battery?

If you live in an area where power outages are frequent, or if you consume more electricity at night, acquiring batteries for your 30kW solar system is strongly recommended.

A 30kW solar system with a 25kW inverter and a 16kWh battery might cost between $20000 and $36000, depending on the battery brand you want to install.

Is a 30 kW solar system the right choice or size for you?

Finding out which size of solar is the right choice for you depends on your current consumption & near-future planning as more people are installing EVs (Electric vehicles).

A 9.9kW or a 10kW Solar may produce between 36kWh & 45kWh depending on the location & orientation of the roof. So, if the average daily usage is between 26kWh to 35kWh, a 10kW solar would be a good fit for you. To know more in detail, click on the request to quote.

How much space do I need for a 30 kW solar?

Although each panel is a different size, they frequently range between 1635 * 1125 * 35 (mm) to 2000 * 1.214 * 35 (mm). By determining the dimensions of the roof or sheds where the system will get placed, we can establish the number of panels we can install there.

Make My Solar uses a highly advanced piece of software called NearMap to design the layout of the panels & the solar.

Solar Panels & Inverter Brand MakeMySolar Works With